the big deal ? low-profle shielded package ? low passband insertion loss ? excellent rejection product overview CBP-1400E+ is a ceramic-coaxial-resonator based bandpass flter in a shielded package (size of 0.638" x 0.434" x 0.105") fabricated using smt technology. this flter offers outstanding close in rejection, low insertion loss and high power handling for use in broadband, fxed wireless, image rejection and point-to-point radio. in addition, this model uses low profle resonators which gives very good size advantage. feature advantages high selectivity the CBP-1400E+ flter incorporates high-q ceramic resonators that enables sharp rejection near passband. low passband vswr this flter maintains typical vswr over a wide passband frequency range making this flter easier to integrate into receiver and transmitter rf chains with less concerns for in band frequency ripple. rugged construction the CBP-1400E+ has been qualifed over wide range of thermal, mechanical and environmental conditions including withstanding the stress of extensive solder refow cycles. key features CBP-1400E+ 50 ? 1320 to 1480 mhz case style: lw1611 bandpass filter surface mount page 1 of 3 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
surface mount CBP-1400E+ electrical specifcations at 25c case style: lw1611 parameter f# frequency (mhz) min. typ. max. unit pass band center frequency 1400 mhz insertion loss f1-f2 1320-1480 1.7 3 db vswr f1-f2 1320-1480 1.5 2.3 :1 stop band, lower insertion loss dc-f3 dc-1150 20 42 db vswr dc-f3 dc-1150 36 :1 stop band, upper insertion loss f4-f5 1600-2400 20 31 db vswr f4-f5 1600-2400 20 :1 maximum ratings operating temperature -40c to 85c storage temperature -55c to 100c rf power input* 12.6w max. at 25c * derate linearly to 6.5w at 85c permanent damage may occur if any of these limits are exceeded. rev.a m151121 CBP-1400E+ edu1470/2 urj 150515 page 2 of 3 typical frequency response functional schematic dc f3 f1 f2 frequency (mhz) insertion loss (db) f4 f5 rf in rf out 50 1320 to 1480 mhz bandpass filter applications ? wireless medical telemetly ? satellite digital audio broad casting ? aeronautical radio navigation features ? low insertion loss ? minimal insertion loss variation over operating temperature ? low-profle shielded package typical performance data at 25 c frequency (mhz) insertion loss (db) vswr (:1) frequency (mhz) group delay (nsec) 0 20 40 60 80 100 120 0 400 800 1200 1600 2000 2400 insertion loss (db) frequency (mhz) cbp - 1400e+ insertion loss (fullband) 1 10 100 1000 0 400 800 1200 1600 2000 2400 vswr frequency (mhz) cbp - 1400e+ vswr 1.0 1.2 1.4 1320 1400 1480 0 10 20 30 1200 1300 1400 1500 1600 insertion loss (db) frequency (mhz) cbp - 1400e+ insertion loss (passband) 1.2 1.4 1.6 1320 1400 1480 5.2 5.4 5.6 5.8 6.0 6.2 6.4 6.6 1320 1360 1400 1440 1480 group delay (ns) frequency (mhz) cbp - 1400e+ group delay 1 99.11 1737.18 1320 6.30 800 66.14 69.49 1330 6.06 1150 46.82 40.41 1340 5.86 1160 43.30 38.61 1350 5.69 1180 36.06 32.18 1360 5.55 1200 28.23 24.83 1370 5.43 1220 19.30 15.67 1380 5.36 1240 9.28 5.85 1390 5.33 1320 1.56 1.07 1395 5.33 1400 1.41 1.27 1400 5.34 1480 1.58 1.02 1405 5.36 1530 5.42 3.36 1410 5.39 1540 9.03 6.28 1420 5.45 1550 13.22 10.37 1425 5.48 1575 23.49 20.70 1430 5.52 1600 32.78 28.49 1440 5.59 1610 36.45 31.03 1450 5.71 1650 54.03 39.49 1460 5.88 2000 54.44 59.91 1470 6.14 2400 60.59 54.29 1480 6.49 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
page 3 of 3 CBP-1400E+ outline drawing input 1 output 11 ground 2,3,4,5,6,7,8,9,10,12,13,14,15,16 pad connections demo board mcl p/n: tb-611+ suggested pcb layout (pl-338) inch mm outline dimensions ( ) a b c d e f g h j k l m .434 11.02 .638 16.21 .120 3.05 .060 1.52 .030 0.76 .100 2.54 .119 3.02 .095 2.41 .129 3.28 .110 2.79 .678 17.22 .474 12.04 n p q wt, .109 2.77 .090 2.29 .085 2.16 grams 0.8 bandpass filter notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
|
